SUMMARY OF SID & CPCP INSPECTIONS: CESSNA 100 / 200 series
SIDs Inspection BASIC PRICE
-
Price: From 4.500 EUR (Applicable to all Cessna 100 / 200 series models)
-
Quoted individually based on aircraft type, total hours, and operating environment (e.g., "Severe" vs. "Normal").
Included in BASIC PRICE:
-
All visual inspections for Inspection Operation 1 – 2X (included due to similar dismantling requirements).
-
All Liquid Penetrant (NDT) testing performed by in-house technicians.
Excluded from BASIC PRICE:
-
Specialized NDT by external certified suppliers.
-
Treatment of corrosion, cracks, or wear-out.
-
The SID program requires compliance with specific SBs per aircraft model.
-
Spare parts or Service Kits and additional repair labor.
-
Labor Rate: 45 EUR / hour.
Mandatory Specialized NDT Inspections
-
Eddy current; Magnetic particle; Ultrasonic thickness testing.
MAINTENANCE:
Regular visual and pressure inspections:
-
A detailed inspection of the surface of the De-Ice Boots to detect microcracks (pinholes), cuts, peeling edges, or damaged seams.
Preventive surface protection:
-
Application of approved cosmetic and protective products that prevent rubber aging.
Cleaning and degreasing:
-
Removal of operational dirt, oil, and fuel residues using approved chemical cleaners to prevent material degradation.
REPAIR:
Repairs are classified according to the extent of damage and are performed either on-site or require complete replacement of the part:
1. Permitted repairs (within limits per CMM)
If the damage does not exceed 4" × 9" and does not penetrate the bottom fabric layer, the following is performed:
-
Pinhole repairs: Sealing of small punctures (4.2 mm).
-
Patching (Small, Medium, Large): Application of repair patches.
-
Labor Rate: 45 EUR / hour
2. Irreparable damage (Requiring replacement)
-
Cuts, tears, or punctures that penetrate through the bottom fabric layer (bondside fabric layer).
-
Damaged or broken structural seams and threads (broken stitch/thread).
-
Damage to a continuous area exceeding 4" × 9".
-
Labor Rate: 45 EUR / hour.
SUMMARY OF SID & CPCP INSPECTIONS: CESSNA 100 / 200 series
SIDs Inspection BASIC PRICE
-
Price: From 4.500 EUR (Applicable to all Cessna 100 / 200 series models)
-
Quoted individually based on aircraft type, total hours, and operating environment (e.g., "Severe" vs. "Normal").
Included in BASIC PRICE:
-
All visual inspections for Inspection Operation 1 – 2X (included due to similar dismantling requirements).
-
All Liquid Penetrant (NDT) testing performed by in-house technicians.
Excluded from BASIC PRICE:
-
Specialized NDT by external certified suppliers.
-
Treatment of corrosion, cracks, or wear-out.
-
The SID program requires compliance with specific SBs per aircraft model.
-
Spare parts or Service Kits and additional repair labor.
-
Labor Rate: 45 EUR / hour.
Mandatory Specialized NDT Inspections
-
Eddy current; Magnetic particle; Ultrasonic thickness testing.
MAINTENANCE:
Regular visual and pressure inspections:
-
A detailed inspection of the surface of the De-Ice Boots to detect microcracks (pinholes), cuts, peeling edges, or damaged seams.
Preventive surface protection:
-
Application of approved cosmetic and protective products that prevent rubber aging.
Cleaning and degreasing:
-
Removal of operational dirt, oil, and fuel residues using approved chemical cleaners to prevent material degradation.
REPAIR:
Repairs are classified according to the extent of damage and are performed either on-site or require complete replacement of the part:
1. Permitted repairs (within limits per CMM)
If the damage does not exceed 4" × 9" and does not penetrate the bottom fabric layer, the following is performed:
-
Pinhole repairs: Sealing of small punctures (4.2 mm).
-
Patching (Small, Medium, Large): Application of repair patches.
-
Labor Rate: 45 EUR / hour
2. Irreparable damage (Requiring replacement)
-
Cuts, tears, or punctures that penetrate through the bottom fabric layer (bondside fabric layer).
-
Damaged or broken structural seams and threads (broken stitch/thread).
-
Damage to a continuous area exceeding 4" × 9".
-
Labor Rate: 45 EUR / hour.
SUMMARY OF SID & CPCP INSPECTIONS: CESSNA 100 / 200 series
SIDs Inspection BASIC PRICE
-
Price: From 4.500 EUR (Applicable to all Cessna 100 / 200 series models)
-
Quoted individually based on aircraft type, total hours, and operating environment (e.g., "Severe" vs. "Normal").
Included in BASIC PRICE:
-
All visual inspections for Inspection Operation 1 – 2X (included due to similar dismantling requirements).
-
All Liquid Penetrant (NDT) testing performed by in-house technicians.
Excluded from BASIC PRICE:
-
Specialized NDT by external certified suppliers.
-
Treatment of corrosion, cracks, or wear-out.
-
The SID program requires compliance with specific SBs per aircraft model.
-
Spare parts or Service Kits and additional repair labor.
-
Labor Rate: 45 EUR / hour.
Mandatory Specialized NDT Inspections
-
Eddy current; Magnetic particle; Ultrasonic thickness testing.
MAINTENANCE:
Regular visual and pressure inspections:
-
A detailed inspection of the surface of the De-Ice Boots to detect microcracks (pinholes), cuts, peeling edges, or damaged seams.
Preventive surface protection:
-
Application of approved cosmetic and protective products that prevent rubber aging.
Cleaning and degreasing:
-
Removal of operational dirt, oil, and fuel residues using approved chemical cleaners to prevent material degradation.
REPAIR:
Repairs are classified according to the extent of damage and are performed either on-site or require complete replacement of the part:
1. Permitted repairs (within limits per CMM)
If the damage does not exceed 4" × 9" and does not penetrate the bottom fabric layer, the following is performed:
-
Pinhole repairs: Sealing of small punctures (4.2 mm).
-
Patching (Small, Medium, Large): Application of repair patches.
-
Labor Rate: 45 EUR / hour
2. Irreparable damage (Requiring replacement)
-
Cuts, tears, or punctures that penetrate through the bottom fabric layer (bondside fabric layer).
-
Damaged or broken structural seams and threads (broken stitch/thread).
-
Damage to a continuous area exceeding 4" × 9".
-
Labor Rate: 45 EUR / hour.
